Electrical Services in Snellville, GA

We relocated the wired doorbell, carefully disconnecting it from its original position and rewiring it to a new spot, ensuring it functions perfectly with the new storm door.

Installed a 30 amp, 120/240V circuit, ran conduit from the existing GE panel, and repaired an outdoor floodlight. Fixed code issues by installing a junction box.

We installed a dedicated circuit for a single-point use, reset the solar inverter breaker, restored power, and replaced a burned receptacle in a room.

We diagnosed and fixed a fridge circuit issue, traced to a GFCI breaker tripping. Restored power to the dedicated circuit in one room, ensuring safe and reliable operation.

I thoroughly inspected the electrical panel, checking buss bars and OCODs for faults, burns, and hazards. I ensured safety and compliance, providing a detailed assessment of the system.

Level 2 Diagnostic. Single dedicated circuit to single point of use circuit in a single room. Found whole house fan splicing to be cause of tripping breaker, have removed and verified proper operation also installed GCFI where code requires to update home safety.

I replaced the GFCI outlets, installed new ones where needed, and added a 110V switch/outlet in the upstairs room and hallway.

Replaced a 15-20 amp standard breaker and a 30 amp disconnect, resolving a code violation. Installed Siemens breakers in a Square D panel, ensuring compliance after inspection.

We installed a new conduit for the disconnect switch, ensuring it met all specifications and codes. We also rerouted the conduit from the disconnect to the main distribution panel, securely mounting and terminating the conductors.

I installed an EV charging station, ensuring it was within 10 feet of the panel. The panel had available space, and the installation was completed efficiently.

I installed a dedicated circuit for a single point in a specific room. After diagnosing a power loss, I successfully restored power, ensuring everything functions correctly.

I installed a surge protector on a previously burned and hazardous electrical panel, ensuring safety and preventing potential electrical fires.

I installed a 40 AMP dedicated circuit for an EV charging station, ensuring it was securely mounted. I used an outdoor-rated station, tested the voltage, and verified everything was functioning correctly.

We identified a circuit problem affecting a specific room. Upon inspection, we discovered an unwired outlet on the left wall. We provided a thorough analysis and successfully fixed the issue, ensuring proper power supply.

I installed a Level 2 EV charging station using a NEMA 14-50 receptacle. This involved securing the mounting bracket, connecting wiring, and ensuring all components met local electrical codes.